Vehicle Control Unit

VCU_v30

Applications

Electric & Hybrid vehicle control unit

  • Driving Strategy Control
  • Hybrid Engine Speed & Load Control
  • Cluster Control
  • BCM & CAN gateway Control
  • On Board Charge Control
  • Quick Charge Control
  • Passenger Car & Light-duty Vehicle (12V) to Bus & Heavy-duty Vehicle (24V)

Specifications
Parameter
Operating Voltage 6V ~ 32V
Maximum Supply Voltage 36V
Standby Current < 1mA
Supply Current(without load) 200mA@12V
Total Load Current 60A
Operating Temperature -40°C ~ +125°C
Degree of Protection IP67 & IP6k9k
Weight 730 g
Standards
Electrical HMC ES96200-00
ES96202-01
ES95400-10
ES95682-00
ECE ECE R10.3
Vibration & Impact HMC ES95400-10
Environmental HMC ES95400-10

Features

Microprocessor

  • SAK-XC2299H-200F100L (Infineon)
  • 100 MIPS Performance @ 100 MHz Frequency

Memory

  • 1.6MB on-chip flash memory
  • 138kB on-chip RAM
  • 16kB on-chip EEPROM

Inputs

  • Digital Inputs (0 ~ 32V)
    • 4 x Digital Input for Wake up(3 x DIH(Digital Input High), 1 x DIL(Digital Input Low))
    • 8 x DIH (High-side Digital Input)
    • 10 x DIX (Configurable Digital Input)
    • Default: 7 x DIH, 3 x DIL
  • Analog Input
    • 2 x Potentiometer for APS & BPS
    • 2 x Pressure Sensor
    • 2 x NTC Sensor
    • 2 x Common mode A/D (Configurable 0 to 32V input)
    • Normal Charge(OBC) Connector Proximity (SAE J1772)
  • Frequency Input
    • 1 x High speed frequency signal input (Internal pull-up)
    • Normal Charge(OBC) Pilot input (SAE J1772)
  • Quick Charge Pilot Input

Outputs

  • 16 x DOL (Digital Output Low)
    • 2 x 1.1A, 12 x 2.2A , 2 x 3.3A Low-side out.
    • PWM output (up to 10kHz)
  • 4 x DOH (Digital Output High)
    • All DOH port up to 5A High-side output with current sensing.
    • PWM output (up to 2kHz)
  • 6 x High & Low Side Output
    • 4 x 10A, 2 x 5A High side & Low side output with high-side current sensing.
    • PWM output (up to 20kHz)
    • Motor Driver for half bridge & full bridge.

Communications

  • 4 x CAN Interface (HS CAN)
    • Baud Rate : 50kbps - 1Mbps
    • All CAN Termination with internal circuit (default)
    • CAN Gateway Function
  • LIN Interface
  • RS-232 Interface (up to 200kbps)

Sensor Supply

  • 6 x Sensor Supply Output (5V 400mA)

Protection

  • Load dump protection
  • Over voltage protection
  • Revers voltage protection

Others

  • Monitoring of board temperature, supply voltage and sensor supply.

Function Block Diagram


Dimensions