Applications
- Electric & Hybrid vehicle Display indicator
- Electric & Hybrid vehicle Instrument display
- Camera Display system(2Ch)
- Passenger Car & Light-duty Vehicle (12V) to Bus & Heavy-duty Vehicle (24V)
Specifications
Parameter |
Operating Voltage |
9V ~ 32V |
Maximum Supply Voltage |
36V |
Standby Current |
< 1mA |
Supply Current |
600mA@12V |
Operating Temperature |
-40°C ~ +85°C |
Weight |
600 g |
LCD |
LCD Size |
7inch |
Dimensions(mm) |
167.7(W) x 109.5(H) x 9.0(D) |
Active Area(mm) |
152.4(w) x 91.44(H) |
Resolution |
800 x 3(RGB) x 480 |
Number of Colors |
262k(6-bit RGB) |
Backlight |
LED |
Buzzer |
Sound Pressure Level(dB) |
Min. 85/ at 10cm |
Resonant Frequency(Hz) |
750Hz |
Touch Panel(Option) - Capacitive touch |
Transmittance |
≥85% |
Hardness |
6H |
Standards |
Electrical |
ECE R10.4 |
Features
Microprocessor
- 32-bit EISC Microprocessor(AMAZON-ll)
- Up to 166MHz
- 8KB 2way Instruction Cache
- 8KB 2way Data Cache
- 16KB Internal SPM Embedded Memory
- SAK-XC2238N-40F80L(INFINEON)
- SDRAM
- 1Gb G-die DDR2 SDRAM(Samsung)
- Memory
- SLC NAND Flash Memory 2Gbit(Spansion)
Communications
- 4 x CAN Interface (HS CAN)
- Baud Rate : 50kbps - 1Mbps
- CAN Termination with internal circuit (default)
- CAN Gateway Function
- LVDS Interface(LCD)
- USB 2.0 Device(BSL Mode)
Display Mode
- MAIN View
- DATA View
- DTC View
- Camera View(Ch1)
- Camera View(Ch2)
∗ Display Mode change by CAN
Touch Mode(option)
- Capacitive Touch panel
- Interface : I2C
Dimmer
- Back light set up by 2step
Inputs
- Digital Input (0 ~ 32V)
- 2 x Digital Input for Wake up(Configurable Digital Input High and Low)
Default: 1 x DIH, 1 x DIL
- 12 x DIX (Configurable Digital Input High and Low)
Default: 8 x DIH, 4 x DIL
- Analog Input
- 6 x Common mode A/D (Configurable 0 to 32V input)
- Video Input
- CAM1(Inner View)
- CAM2(Rear View)
Outputs
- 3 x Sensor Supply Output(5V 400mA)
- Camera Power Supply(12V 2A)
Sound Transducer
- Door Open Alarm
- Alarm of signal Light
Protection
- Short circuit to Battery & ground
- Load dump protection
- Over voltage protection
- Revers voltage protection
Display Indicator Description
No. |
Description |
No. |
Description |
No. |
Description |
1 |
Speedometer(Popup area) |
9 |
ECO Drive Mode |
17 |
Electric & Hybrid Vehicle system warning |
2 |
Odometer |
10 |
Motor Power |
18 |
Master warning |
3 |
Battery State |
11 |
Power limit(reduction) |
19 |
Coolant Pressure warning |
4 |
Battery Temperature |
12 |
Isolation warning |
20 |
ECAS |
5 |
Coolant Temperature |
13 |
Battery Soc |
21 |
Retarder state |
6 |
Electric & Hybrid Vehicle State |
14 |
Soc level warning |
22 |
Brake warning |
7 |
Battery connect state |
15 |
Battery Soc gage |
23 |
ABS warning |
8 |
Motor Power gage |
16 |
Battery(Low voltage) warning |
24 |
Charge state |
Instrument Display Description
No. |
Description |
No. |
Description |
No. |
Description |
1 |
Popup area |
12 |
Power limit |
23 |
Parking Brake warning |
2 |
Speedometer |
13 |
ECO Drive mode |
24 |
Electric & Hybrid Vehicle system warning |
3 |
Motor Power |
14 |
Turn signal lamp |
25 |
Battery(Low voltage) warning |
4 |
Fuel Gage |
15 |
Electric & Hybrid Vehicle State |
26 |
TPMS warning |
5 |
Coolant Temperature |
16 |
Master warning |
27 |
Electronic stability control warning |
6 |
Battery Temperature |
17 |
High beam |
28 |
Traction control system Off |
7 |
Battery SOC |
18 |
Fog lamp |
29 |
Engine warning |
8 |
Trip |
19 |
Seat belt warning |
30 |
Charge state |
9 |
Odometer |
20 |
EPS warning |
31 |
ABS warning |
10 |
Drive Distance |
21 |
Air-back |
32 |
Door open |
11 |
Position lamp |
22 |
Brake warning |
33 |
- |
Dimensions